ComfyTENS TENS unit – TENS 7000

Description

100 milliamp 2 Channel 5 Mode Digital TENS Unit with Timer
Powerful (100mA) TENS unit. Rubber-grip sides and hinged front panel for easier access to digital mode, pulse and timer controls. Comes complete with instruction manual, leadwires, 4 electrodes, sturdy carrying case.
Common Uses: Back pain, Neck pain, Joint pain, arthritis, post-op pain, post-traumatic acute pain, chronic pain.

Features
100 milliamp output
Rubber grip sides
Easy-to-read LCD screen
Safety amplitude cover prevents bumping of controls
5 modes: Burst, Normal, Modulation, SD1, SD2
Control treatment time automatically (5 to 60 min) or use continuously
Record up to 999 hours of treatment time
Hinged front panel for access to digital mode, pulse and timer controls
Durable METAL Belt Clip
3 Year warranty against manufacturer defects
Technical Specifications
Channels: Dual isolated between channels
Pulse Amplitude: Adjustable 0-100mA peak into 500 ohm load each channel
Pulse Rate: Adjustable 2-150Hz, 1 Hz step
Pulse Width: Adjustable 50-300 microseconds, 10 microsecond step
Wave Form: Asymmetrical Bi-Phasic Square Pulse
Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration1), SD2(Strength Duration2)
Burst Mode: Burst rate: Adjustable, 0-5 – 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz
Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
Modulation mode: is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300uS) are fully adjustable.
The SD1(Strength-Duration) mode: consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300uS) are fully adjustable.
The SD2(Strength-Duration) mode: consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300uS) are fully adjustable
Timer: Adjustable from 5 to 60 min, or continuous. Adjustable in 5 minutes each step. Treatment time counts down automatically.
Patient Compliance Meter: 60 sets of operation records, 999 hours record time
Low battery indicator: A low battery indicator will show up on the LCD when the battery is low.
Warranty: 3 Year warranty against manufacturer defects
Power Supply: 9V battery (disposable or NiMh rechargeable)
Battery Life: 50-70 hours at average settings (disposable), 8-10 hours (rechargeable NiMh)
Size: 10.1cm(h) x 6.1cm(w) x 2.45cm(d)
Weight: 150 grams (including battery)
System Includes: Stimulator, Lead Wires, 1 package of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.

*** A PRESCRIPTION IS REQUIRED UNLESS YOU ARE A HEALTH PROFESSIONAL OR RESELLER. PLEASE FAX TO 1-866-682-7756 OR EMAIL TO SALES@TENSPRODUCTS.COM ***